 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers FEATURES * 1 to 150 psi absolute, gage or differential pressure (custom calibrations available) * 1...6 V or 4...20 mA output * Internal supply regulation * Precision temperature compensated and calibrated * Special calibrations for small volumes on request SERVICE Non-corrosive, non-ionic working fluids, such as dry air and dry gases Scale: 1 cm 1 inch SPECIFICATIONS Maximum ratings Supply voltage 140SC...-PCB 420SC...-PCB1 Maximum load current 140SC...-PCB only Source Sink Temperature limits Storage Operating Compensated Lead temperature (10 sec. soldering) Humidity limits Pressure inlets only Proof pressure2 All 1 psi, 3 psi, 5 psi devices All 15 psi devices All 30 psi devices All 100 psi devices All 150 psi devices ELECTRICAL CONNECTION 1...6 V output version 7...24 V 12...36 V +Vs 7 V to 24 V 20 mA 10 mA -55 to 100C -40 to 85C 0 to 70C 300C 0 - 100 %RH 20 psi 30 psi 60 psi 150 psi 200 psi 140SC...PCB Vout V -Vs 4...20 mA output version +Vs 420SC...PCB -Vs 12 V to 36 V V RL GND March 2006 / 002 1/6 www.sensortechnics.com 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers PERFORMANCE CHARACTERISTICS 1 - 6 V output version (unless otherwise noted VS = 8 V, RL > 100 k, tamb = 25C) Characteristics Operating pressure vacuum gage devices3 141SC01G-PCB 141SC05G-PCB 141SC15G-PCB 141SC30G-PCB 141SC100G-PCB 142SC01D-PCB 142SC05D-PCB 142SC15D-PCB 142SC30D-PCB 142SC100D-PCB 142SC150D-PCB 142SC15A-PCB 142SC30A-PCB 142SC100A-PCB 143SC01D-PCB 143SC03D-PCB 143SC05D-PCB 143SC15D-PCB 141SC.../142SC...-PCB 143SC...-PCB 141SC.../142SC...-PCB 143SC...-PCB 143SC...-PCB all 1 psi devices all others Min. -1 -5 -15 -30 -100 0 0 0 0 0 0 0 0 0 -1 -2.5 -5 -15 0.95 3.45 4.95 2.45 5.90 Typ. Max. 0 0 0 0 0 1 5 15 30 100 150 15 30 100 1 2.5 5 15 1.05 3.55 5.05 2.55 6.10 0.5 3.0 1.0 Unit p si g differential devices4 psid(g) absolute devices5 p si a pressure/vacuum devices4 psid(g) Zero pressure offset Full scale span6 Full scale output Output at lowest specified pressure Non-linearity and hysteresis (BSL)7 Thermal effects8 Combined offset and span (0 to 70C) Long term stability9 Response time (10 to 90%) Power supply rejection rate 1.00 3.50 5.00 2.50 6.00 1.00 0.1 1.5 0.5 0.1 0.1 0.05 0.03 V %FSO ms %FSO/V Offset Span 2/6 March 2006 / 002 www.sensortechnics.com 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers PERFORMANCE CHARACTERISTICS 4 - 20 mA output version (unless otherwise noted VS = 15 V, RL = 100 , tamb = 25C) Characteristics Operating pressure differential devices4 420SC01D-PCB 420SC05D-PCB 420SC15D-PCB 420SC30D-PCB 420SC100D-PCB 420SC150D-PCB 420SC15A-PCB 420SC30A-PCB 420SC100A-PCB 423SC01D-PCB 423SC03D-PCB 423SC05D-PCB 423SC15D-PCB 420SC...-PCB 423SC...-PCB 420SC...-PCB 423SC...-PCB 423SC...-PCB Min. 0 0 0 0 0 0 0 0 0 -1 -2.5 -5 -15 3.9 11.9 15.8 7.9 Typ. Max. 1 5 15 30 100 150 15 30 100 1 2.5 5 15 4.1 12.1 16.2 8.1 Unit psid(g) absolute devices5 p si a pressure/vacuum devices4 p si d Zero pressure offset Full scale span6 Full scale output Output at lowest specified pressure Non-linearity and hysteresis (BSL) Thermal effects8 Combined offset and span (0 to 70C) (-40 to 0C, 70 to 100C) Repeatability Long term stability9 Output noise Response time (10 to 90%) Power supply rejection rate 7 4.0 12.0 16.0 8.0 20.0 4.0 0.1 mA 0.5 all 1 psi devices all others 1.5 0.5 2.0 0.1 0.1 0.04 0.1 0.05 0.03 3.0 1.5 %FSO ms %FSO/V Offset Span Specification notes: 1. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 2. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 3. The output signal of all 141SC...-PCB devices is proportional to the vacuum applied to port B, relative to port A, e. g. the output signal increases when pressure is applied to port A relative to port B. 4. The output signal of all 142SC...D-PCB and 143SC...D-PCB devices is proportional to the pressure applied to port B, relative to port A, e.g. the output signal increases when vacuum is applied to port A relative to port B. 5. The output signal of all 142SC...A-PCB is proportional to the pressure applied to port A. 6. Full scale span is the algebraic difference between the positive full scale output and the zero pressure offset. 7. Non-linearity refers to the Best Straight Line fit measured for offset pressure, full scale pressure and 1/2 full scale pressure. 8. Thermal effects tested and guaranteed from 0 - 70C relative to 25C. All specifications shown are relative to 25C. 9. Change in output after one year or 1 million pressure cycles. March 2006 / 002 3/6 www.sensortechnics.com 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers OUTPUT CHARACTERISTICS 1 - 6 V output versions Vacuum gage devices 141SC...-PCB 6 Vout 5 V 4 3 2 1 1 - 6 V output versions Differential devices 142SC...-PCB 6 Vout 5 V 4 3 2 1 -100 -80 -60 -40 -20 0 % full scale pressure (vacuum) 0 20 40 60 80 100 % full scale pressure 1 - 6 V output versions Pressure/vacuum devices 143SC...-PCB 4 - 20 mA output versions Differential devices 420SC...-PCB 6 Vout 5 V 4 3 2 1 0 -100 3.5V 20 Iout 16 mA 12 8 4 -50 0 50 100 % full scale pressure 0 20 40 60 80 100 % full scale pressure 4/6 March 2006 / 002 www.sensortechnics.com 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers OUTPUT CHARACTERISTICS 4 - 20 mA output versions Pressure/vacuum devices 423SC...-PCB 20 Iout 16 mA 12 8 LOAD LIMITATION 4 - 20 mA output versions 1200 Ohm 1000 800 600 400 operating range 4 200 -100 -50 0 50 100 % full scale pressure 0 10 20 30 V Vsupply OUTLINE DRAWING 5 30.0 port A 14.0 18.3 30.5 9.1 59.8 52.4 10.7 3 terminals 0.56 diam. 2 x 5.08 typ. 22.7 1 2 3 12.6 dimensions in mm 3,4 port B 4.8 diam. 3.5 diam. 2 x mounting holes NOM 6.0 mass: 20 g Pin connection Connection 1 - 6 V 4 - 20 mA version Pin version 1 +Vs NC 2 -Vs -Vs 3 Vout +Vs March 2006 / 002 5/6 www.sensortechnics.com 140SC...-PCB / 420SC...-PCB Series Signal conditioned precision pressure transducers ORDERING INFORMATION Part number Operating pressure 1...6 V output 0 to -1 psig 0 to -5 psig Vacuum gage devices 0 to -15 psig 0 to -30 psig 0 to -100 psig 0 to 1 psid(g) 0 to 5 psid(g) 0 to 15 psid(g) Differential/gage devices 0 to 30 psid(g) 0 to 100 psid(g) 0 to 150 psid(g) 0 to 15 psia Absolute devices 0 to 30 psia 0 to 100 psia 0 to 1 psid(g) 0 to 2.5 psid(g) Pressure/vacuum devices 0 to 5 psid(g) 0 to 15 psid(g) 143SC05D-PCB 143SC15D-PCB 423SC05D-PCB 423SC15D-PCB 142SC30D-PCB 142SC100D-PCB 142SC150D-PCB 142SC15A-PCB 142SC30A-PCB 142SC100A-PCB 143SC01D-PCB 143SC03D-PCB 420SC30D-PCB 420SC100D-PCB 420SC150D-PCB 420SC15A-PCB 420SC30A-PCB 420SC100A-PCB 423SC01D-PCB 423SC03D-PCB 141SC01G-PCB 141SC05G-PCB 141SC15G-PCB 141SC30G-PCB 141SC100G-PCB 142SC01D-PCB 142SC05D-PCB 142SC15D-PCB 4...20 mA output ----------420SC01D-PCB 420SC05D-PCB 420SC15D-PCB Custom calibrations available Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 6/6 March 2006 / 002 www.sensortechnics.com |
Price & Availability of 420SC150D-PCB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |